產品特點： 采用電動液壓控制，啟閉高度可任意調節（范圍內） ,提高裝卸效率。液壓式登車橋爬坡角度為≤13°唇板與車廂搭接更利于車輛上下。
Features: it adopts electro-hydraulic control, and the opening and closing height can be adjusted arbitrarily (within the range), so as to improve the loading and unloading efficiency. The climbing angle of the hydraulic climbing bridge is ≤ 13 ° and the lap between the lip and the carriage is more favorable for the vehicle up and down.
適用環境：物流倉儲、碼頭、工廠、冷鏈等物流裝車臺與車廂存在水平高度差的場所，方便叉車、液壓車等設備裝卸貨物使用。
Applicable environment: places with poor level between logistics loading platform and carriage, such as logistics storage, wharf, factory, cold chain, etc., are convenient for loading and unloading goods with forklift, hydraulic truck and other equipment.
啟閉速度：0.18m/s.
Opening and closing speed: 0.18m/s
使用頻率：500次/天
Frequency of use: 500 times / day
安全措施：采用低壓24v控制系統，防滑花紋鋼板，使平臺有良好的防滑性能。兩側設防軋腳裙板，防止腳趾伸入平臺造成意外傷害。并有保障維護人員進入登車橋內部維護時安全的支撐桿。除提供標準尺寸橡膠防撞墊外，可提供不同尺寸的防撞墊，以保證泊車（固定式卸貨登車橋）。
Safety measures: adopt low-voltage 24V control system and anti-skid checkered steel plate to make the platform have good anti-skid performance. There are foot rolling skirts on both sides to prevent accidental injury caused by toes extending into the platform. And a support rod is provided to ensure the safety of maintenance personnel when entering the internal maintenance of the boarding bridge. In addition to the standard size of rubber crash pad, different sizes of crash pad can be provided to ensure parking (fixed unloading landing bridge).
固定登車橋Fixed boarding bridge
XRHZ-XHPT-GD
開啟方式：按鈕開關控制可與快速軟簾門、翻板滑升門、伸縮通道等設備聯動使用。
Opening mode: button switch control can be used in linkage with quick soft curtain door, flap sliding door, expansion channel and other equipment.
控制系統：采用低壓24V控制220V或380V液壓動力系統、操作簡單、高度可任意調節，調節范圍大，有效提高裝卸效率。并可采用互鎖聯動方式。當快卷門、工業提升門或其他設備處于關閉狀態時卸貨平臺無法打開。當打開條件具備后方可正常啟閉，確保了操作的安全性。
Control system: adopt low-pressure 24V control 220V or 380V hydraulic power system, simple operation, height can be adjusted at will, large adjustment range, and effectively improve loading and unloading efficiency. And can adopt interlock linkage mode. The unloading platform cannot be opened when the fast rolling door, industrial lifting door or other equipment is closed. When the opening conditions are met, normal opening and closing can be carried out to ensure the safety of operation.
動力性能：采用電動液壓驅動，舉升力為1T-15T（以實際情況為準）。 Power performance: it is driven by electric hydraulic pressure, and the lifting force is 1t-15t (subject to the actual situation). 框架材質：唇板采用≥5mm防滑花紋鋼板制作與平臺采用通軸連接，使強度、穩定性得以提高。主框架選用高強度“U”形梁設計，保障其在高負載、長時間運行而不容易變形。平臺面板采用防滑花紋鋼板，使平臺有良好的防滑性和排水性。 Frame material: the lip plate is made of ≥ 5mm anti-skid checkered steel plate and the platform is connected by through shaft to improve the strength and stability. The main frame is designed with high-strength "U" beam to ensure that it can operate under high load and long time without deformation. The platform panel adopts anti-skid checkered steel plate, which makes the platform have good anti-skid and drainage performance. 注：以上說明為參考資料，以實際參數配置為準；此說明并非實時更新，如有變更敬請諒解！ Note: the above description is for reference, subject to the actual parameter configuration; this description is not updated in real time, please understand if there is any change!
固定式卸貨平臺
登車橋
固定登車橋配合門封使用
